Manual Call Points
Manual
call points should be located at all ground floor exits from the building
and on stairwell landings, conspicuously mounted 1.4m above floor level.
The maximum "travelling distance" to a call point for building
occupants should not be more than 30 metres.
* Approved
to BS5839 Part 2: 1983 - LPCB listing of Fire Alarm models when fitted
with standard glass
* Simple Break Glass operation
* Surface mounted for ease of installation
* Test key provided with every call point
Standard
Call Point
A standard
call point for surface mounting. With 470 ohm 1 watt monitoring resistor.
Waterproof
Call Point
A waterproof call point for surface mounting. With 470 ohm 1 watt monitoring
resistor. Resistant to IP67 and including a sealed switch which also
has a rating of IP67.
Waterproof
Call Point WR4072 - 470
Call
Point Cover / Accessories
Replacement clear polycarbonate cover for use on both standard and waterproof
KAC call points. N.B. Please check to see which cover you require as
there are two variations for the old K Series and the new World Series.
Also available, replacement glasses and spare test keys, suitable for
both old K Series and new World Series KAC call points.
