FIRE ALARM PANELS
(See Training for Fire Alarm Panel Training)

1-8 Zone Panels - Polycarbonate Case

This range of conventional fire alarm panels are housed in a one-size polycarbonate enclosure. The design is both modern and innovative. A particular feature is the ease of mounting the panel to the wall and the termination of all cabling. The panels incorporate a number of additional features: Complete with batteries.

* Built-in detector removal indication facility
* One-man test facility
* Conforms to requirements of BS5839 Part 4
* Removable cable-entry grommets
* User-friendly controls
* Option to semi-flush mounting
* Ample termination space
* Polycarbonate enclosure
* Log book / manual located inside the panel
* Complies with EMC and LVC Directives

All zones and alarm circuits are monitored for open and short circuit fault conditions. Active end-of-line terminators are not required as the feature is provided in the panel electronics.

  • Single zone control panel c/w batteries
  • Two zone control panel c/w batteries
  • Four zone control panel c/w batteries
  • Eight zone control panel c/w batteries

2-4 Zone Panels - Steel Case

These control panels are ideal for use in small to medium sized installations such as office suits, light industrial units and schools. Each panel will accept up to 32 detectors per zone. Designed in accordance with EN54 Part 2.

* Fully programmable
* Ease of installation
* Simple controls and indicators
* Powder coated corrosion resistant Ash Grey paint finish
* Logo insert for installer identification
* Integral power supply

Flexibility
* Minimum of two monitored sounder circuits pulsed and constant
* Volt free contacts for remote transmission of fire and fault
* User facilities include zonal ionisation and one man test mode
* Compatible with most detectors including Apollo Series 60, Hochiki and Nittan

Controls (External)
* Silence local buzzer - inhibits internal buzzer
* Sound Alarms - Activates all indications circuits and panel buzzer
* Silence Alarms - Silences all system audible alarm outputs
* System Reset - Resets system after clearance of latched alarms or fault conditions
* Isolate - Disables the alarms and energises the fault relay
* Keypad - 0-9 numeric keys, cancel and enter keys for access functions
* Test - LED test and / or one man test
* Program - Enable panel programming

  • Two zone panel (excluding batteries)
  • Four zone panel (excluding batteries)